|
|
 |
STROKER KITS back
Instantly turn your B16A into a 2.0L+...or your B18/B20 into a 2.2L+. Kits feature a Crower 4340 forged crankshaft, Crower 4340 steel billet rods, custom JE, CP or Arias pistons, premium H-11 wrist pins, rings, locks, ACL rod, main, thrust bearings and Crower system balancing for easy, drop in installation. B18C/B16A applications require removing piston squirters. Due to inconsistencies in the factory blocks and cranks, some block clearancing may be required on all applications. Bigger is definitely faster! Allow 3-4 weeks delivery.
Stroker kits (featuring a billet crank) are available for all Honda/Acura engines, including the H22 (102mm stroke w/90mm bore = 2.5L) and the K20A (92mm stroke w/91mm bore = 2.4L). These are just a couple of examples of what Crower is capable doing, but you can choose any bore and stroke that you desire. Allow 14 weeks for delivery.
 |
Crower 4340 forged crank (92mm or 95mm for B18/B20 or 84.5mm or 89mm for B16) or Crower 4340 steel billet crank (any desired stroke). |
|
Crower 4340 billet stroker rods. Custom length. |
|
JE/CP/Arias custom pistons. Modified pin boss for longer rod, specify compression (7:1 - 14+:1) & bore size (81-87mm). |
|
Premium, H-11 tool steel wrist pins, gapless rings and locks. |
|
ACL rod, main, thrust bearings included with kit. |
|
Crower internal balancing for drop in installation. |
|
The following chart is just a few examples of available combos. Any desired bore available. |
|
 |
|
| Engine |
Bore |
Stroke |
Total Displacement |
|
| B16A |
81 |
84.4 |
1.74L |
|
| B16A |
84 |
84.5 |
1.87L |
|
| B16A |
87 |
84.5 |
2.01L |
|
| B16A |
81 |
92 |
1.83L |
|
| B16A |
84 |
89 |
1.97L |
|
| B16A |
87 |
89 |
2.12L |
|
| B18 Series (A, B, C) |
81 |
92 |
1.90L |
|
| B18 Series (A, B, C) and B20B (CR-V) |
84 |
92 |
2.04L |
|
| B18 Series (A, B, C) and B20B (CR-V) |
87 |
92 |
2.19L |
|
| B18 Series (A, B, C) |
81 |
95 |
1.96L |
|
| B18 Series (A, B, C) and B20B (CR-V) |
84 |
95 |
2.10L |
|
| B18 Series (A, B, C) and B20B (CR-V) |
87 |
95 |
2.26L |
|
| |
 |
If 4340 billet crank desired add $1500 to price of kit (50% deposit required). Allow 16 weeks for delivery. |
|
For block sleeving, contact Benson Performance Machine at (714) 241-1284 or Golden Eagle at (909) 592-4311 for info and pricing.
Custom billet crankshafts and stroker are available for any make (Honda, Nissan, Toyota, Mitsubishi, Porsche, etc.) however leadtimes are 16-20 months for delivery. 100% deposit required. Call or email for pricing. |
|
|
CAMSHAFTS
STROKER KITS