Camshafts

Camshafts

View Catalog Pages for Mitsubishi by clicking here

12 Item(s)

per page

Shop By

Currently Shopping by:

  1. Category: Mitsubishi Remove This Item
  2. Price: $400.00 - $499.99 Remove This Item
  • Mitsubishi Camshafts Stage 2

    Part Number: 64462-2
    Mitsubishi Camshafts Stage 2

    Mitsubishi - 420A
    Stage 2 - Race - Our most popular profile for the street/strip. Lope at Idle.  Kit 84176 or 84176S reguired.  

    INT/EXH - Dur @ .050” Lift: 196°/194° RR: 1.75/1.75 Gross Lift: .388”/.357”  RPM: 2000 to 7200


    Learn More
    $445.87

  • Mitsubishi/DSM Camshafts

    Part Number: 64434-2
    Mitsubishi/DSM Camshafts

    Mitsubishi - Evolution VIII - 4G63 Evo VIII
    Performance level 5 - Stage 4 - Race Profile - Race only. Not for the inexperienced tuner. Requires spring kit #84175.
    INT/EXH - Dur @ .050” Lift: 214°°/200° RR: 1.7/1.7 Gross Lift: .450”/.425” LSA: 104° RPM: 1100 to 8250 Redline: 8750
    Learn More
    $410.56

  • Mitsubishi/DSM Camshafts

    Part Number: 64433-2
    Mitsubishi/DSM Camshafts

    Mitsubishi - Evolution VIII - 4G63 Evo VIII
    Performance level 4 - Stage 3 - 3/4 Race - Most popular profile. Slight lope at idle, added valve lift requires #84175.
    INT/EXH - Dur @ .050” Lift: 200°/192° RR: 1.7/1.7 Gross Lift: .425”/.408” LSA: 106° RPM: 1000 to 8000 Redline: 8500
    Learn More
    $410.56

  • Mitsubishi/DSM Camshafts

    Part Number: 64432-2
    Mitsubishi/DSM Camshafts

    Mitsubishi - Evolution VIII - 4G63 Evo VIII
    Performance level - Stage 2 - Combination of the popular HKS 264 intake/272 exhaust cam setup.
    INT/EXH - Dur @ .050” Lift: 185°/192° RR: 1.7/1.7 Gross Lift: .415”/.396” LSA: 106° RPM: Idle to 7750 Redline: 8250
    Learn More
    $410.56

  • Mitsubishi/DSM Camshafts

    Part Number: 64431-2
    Mitsubishi/DSM Camshafts

    Mitsubishi - Evolution VIII - 4G63 Evo VIII
    Performance level - Stage 1 - Street use, plug and play, no cylinder head work or spring kit required.
    INT/EXH - Dur @ .050” Lift: 186°/184° RR: 1.7/1.7 Gross Lift: .413”/.391” LSA: 106° RPM: Idle to 7500 Redline: 8000
    Learn More
    $410.56

  • Mitsubishi Camshafts

    Part Number: 64463-2
    Mitsubishi Camshafts

    Mitsubishi - 420A
    Performance level 5 - Stage 3 - Full Race - Recommended for drag race use. Heavy engine mods required.
    INT/EXH - Dur @ .050” Lift: 205°/200° RR: 1.75/1.75 Gross Lift: .444”/.437” LSA: 110° RPM: 2200 to 7500 Redline: 8000
    Learn More
    $445.87

  • Mitsubishi Camshafts

    Part Number: 64462T-2
    Mitsubishi Camshafts

    Mitsubishi - 420A
    Performance level - Stage 2 - Forced Induction Special - Designed specifically for Turbo/Supercharger appl. Springs required.
    INT/EXH - Dur @ .050” Lift: 187°/184° RR: 1.75/1.75 Gross Lift: .409”/.403” LSA: 114° RPM: 1500 to 7200 Redline: 7700
    Learn More
    $445.87

  • Mitsubishi/DSM Camshafts

    Part Number: 64414-2
    Mitsubishi/DSM Camshafts

    Mitsubishi / DSM - 4G63
    Performance level 4 - Stage 3 - 3/4 Race - Recommended for strip and some street. Lope at idle. Requires #84175.
    INT/EXH - Dur @ .050” Lift: 196°/198° RR: 1.7/1.7 Gross Lift: .411”/.391” LSA: 105° RPM: 1100 to 8250 Redline: 8750
    Learn More
    $410.56

  • Mitsubishi/DSM Camshafts

    Part Number: 64413-2
    Mitsubishi/DSM Camshafts

    Mitsubishi / DSM - 4G63
    Performance level - Stage 2 - Most popular profile for street/strip. Excellent all purpose turbo.
    INT/EXH - Dur @ .050” Lift: 195°/196° RR: 1.7/1.7 Gross Lift: .393”/.379” LSA: 106° RPM: 1000 to 8000 Redline: 8500
    Learn More
    $410.56

  • Mitsubishi/DSM Camshafts

    Part Number: 64412-2
    Mitsubishi/DSM Camshafts

    Mitsubishi / DSM - 4G63
    Performance level - Stage 1 - Street use and more aggressive turbo and nitrous. Slight lope at idle.
    INT/EXH - Dur @ .050” Lift: 188°/188° RR: 1.7/1.7 Gross Lift: .391”/.372” LSA: 114° RPM: Idle to 7500 Redline: 8000
    Learn More
    $410.56

  • Mitsubishi Camshafts

    Part Number: 64461-2
    Mitsubishi Camshafts

    Mitsubishi - 420A
    Performance level - Stage 1 - Aggressive street use and nitrous. Slight lope at idle. Kit #84176 req.
    INT/EXH - Dur @ .050” Lift: 184°/184° RR: 1.75/1.75 Gross Lift: .350”/.308” LSA: 110° RPM: 1500 to 7000 Redline: 7500
    Learn More
    $445.87

  • Mitsubishi/DSM Camshafts

    Part Number: 64415-2
    Mitsubishi/DSM Camshafts

    Mitsubishi / DSM - 4G63
    Performance level 5 - Stage 4 - Full Race - Not for the inexperienced tuner. Race only.
    INT/EXH - Dur @ .050” Lift: 200°/196° RR: 1.7/1.7 Gross Lift: .425”/.416” LSA: 105° RPM: 1200 to 8500 Redline: 9000
    Learn More
    $410.56

 

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving and mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts work well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 4 camshafts are designed for heavily modified engines. These camshaft have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine or oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion and tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 5 camshafts are designed for fully prepared, high compression, all-out racing engines and chassis. Extensive cylinder head modification, bigger valves, lightweight valve train, titanium valves, maximum flow carburetion or fuel injection, racing gas, alky or nitro, magneto or electronic ignition, performance rod and crank assembly and increased engine clearances are required for maximum benefit.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

Level 4 camshafts are designed for heavily modified engines. They have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine and oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion,tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

12 Item(s)

per page