Camshafts

Camshafts

Items 1 to 12 of 20 total

per page

Page:
  1. 1
  2. 2
Shop By

Currently Shopping by:

  1. Category: Miscellaneous Remove This Item
  • Custom Cam  Imperial Solid Hardface

    Part Number: 00022
    Custom Cam Imperial Solid Hardface

    Custom Camshaft Imperial Solid. Hardface
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $263.03

  • Custom DOHC Camshafts

    Part Number: 00060-2
    Custom DOHC Camshafts

    Custom Camshaft DOHC (Pair)
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..

    Please call for price. Phone: 619-661-6477

  • Custom Rifle Drilled 4732 Swap Camshaft

    Part Number: 00061
    Custom Rifle Drilled 4732 Swap Camshaft

    Custom Camshaft Rifle Drilled 4732 Switch 50mm or Rocket Block
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $532.33

  • Custom BB Chevrolet Roller Camshaft

    Part Number: 00051
    Custom BB Chevrolet Roller Camshaft

    Custom Camshaft Roller BB Chevrolet 8620 Steel Billet with Cast Iron Gear (Pricing By Special Quotation Only)
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..

    Please call for price. Phone: 619-661-6477

  • Custom V10 Hydraulic Roller Camshaft

    Part Number: 00059
    Custom V10 Hydraulic Roller Camshaft

    Custom Camshaft Dodge RT10 & GTS V-10 Viper Hydraulic Roller
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $723.08

  • Custom Quad Camshafts

    Part Number: 00060-4
    Custom Quad Camshafts

    Custom Camshaft Quad (Set of 4)
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..

    Please call for price. Phone: 619-661-6477

  • Custom Ford Camshaft

    Part Number: 00112
    Custom Ford Camshaft

    Custom Camshaft Ford Flat Head 1938-48
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $340.64

  • Custom Ford Camshaft

    Part Number: 00113
    Custom Ford Camshaft

    Custom Camshaft Ford Flat Head 1949-1953
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $408.76

  • Custom Ford Hydraulic Roller Camshaft

    Part Number: 00117HR
    Custom Ford Hydraulic Roller Camshaft

    Custom Camshaft Ford 351W,302 SVO & 351SVO Hydraulic Roller
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $381.50

  • Custom SIR Inrad Roller Camshaft

    Part Number: 00045
    Custom SIR Inrad Roller Camshaft

    Custom Camshaft SIR Inrad Roller (Soft Inverse Radius)
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $471.70

  • Custom MIR Inrad Roller Camshaft

    Part Number: 00044
    Custom MIR Inrad Roller Camshaft

    Custom Camshaft MIR Inrad Roller (Maximum Inverse Radius)
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $532.33

  • Custom SB Chevrolet Roller Camshaft

    Part Number: 00050
    Custom SB Chevrolet Roller Camshaft

    Custom Camshaft Roller SBC 8620 Steel Billet with Cast Iron Gear (Pricing By Special Quotation Only)
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..

    Please call for price. Phone: 619-661-6477

 

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving and mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts work well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 4 camshafts are designed for heavily modified engines. These camshaft have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine or oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion and tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 5 camshafts are designed for fully prepared, high compression, all-out racing engines and chassis. Extensive cylinder head modification, bigger valves, lightweight valve train, titanium valves, maximum flow carburetion or fuel injection, racing gas, alky or nitro, magneto or electronic ignition, performance rod and crank assembly and increased engine clearances are required for maximum benefit.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

Level 4 camshafts are designed for heavily modified engines. They have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine and oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion,tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Items 1 to 12 of 20 total

per page

Page:
  1. 1
  2. 2