Camshafts

Camshafts

View Catalog Pages for AMC by clicking here

Items 1 to 12 of 22 total

per page

Page:
  1. 1
  2. 2
Shop By

Currently Shopping by:

  1. Category: AMC Remove This Item
  2. Price: $100.00 - $199.99 Remove This Item
  • AMC Hydraulic Flat Tappet Camshaft

    Part Number: 44242
    AMC Hydraulic Flat Tappet Camshaft

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 1 - Mileage Compu-Pro - Enhances mileage and torque in stock engines
    INT/EXH - Dur @ .050” Lift: 184°/192° RR: 1.6/1.6 Gross Lift: .411”/.413” LSA: 110° RPM: Idle to 3500 Redline: 4000
    Learn More
    $162.40

  • AMC 290-401 Compu-Pro Hydraulic Camshaft (276-HDP)

    Part Number: 45249
    AMC 290-401 Compu-Pro Hydraulic Camshaft (276-HDP)

    AMC - 290, 304, 343, 360 (5.9L) & 390 401
    Performance level 2 - Power Compu-Pro - Broadest power range we've ever hard for these engines. Previously only available as a custom order.  Use Camsaver lifters!
    INT/EXH - Dur @ .050” Lift: 214°/218° RR: 1.6/1.6 Gross Lift: .480”/.490” LSA: 112° RPM: 1500 to 4800 Redline: 5500 Plus


    Learn More
    $195.51

  • AMC Hydraulic Flat Tappet Camshaft-Perf Level 4

    Part Number: 44247
    AMC Hydraulic Flat Tappet Camshaft-Perf Level 4

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 4 - Performance Compu-Pro - These cams exhibit strong mid-range and top end torque and horsepower  INT/EXH - Dur @ .050” Lift: 222°/230° RR: 1.6/1.6 Gross Lift: .518”/.525” LSA: 114° RPM: 2000 to 5000 Redline: 5500+


    Learn More
    $162.40

  • AMC Hydraulic Flat Tappet Camshaft-Perf Level 4

    Part Number: 44246
    AMC Hydraulic Flat Tappet Camshaft-Perf Level 4

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 4 - Ultra Performance Compu-Pro - Impressive horsepower increase with little low end loss.  Dont let the lower duration numbers fool you. Nice idle sound.  INT/EXH - Dur @ .050” Lift: 218°/222° RR: 1.6/1.6 Gross Lift: .490”/.501” LSA: 112° RPM: 2000 to 5000 Redline: 5500+


    Learn More
    $162.40

  • AMC Hydraulic Flat Tappet Camshaft

    Part Number: 44902
    AMC Hydraulic Flat Tappet Camshaft

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 1 - Baja Beast - Better than stock, big mid-range power.
    INT/EXH - Dur @ .050” Lift: 194°/202° RR: 1.6/1.6 Gross Lift: .432”/.453” LSA: 112° RPM: 700 to 3800


    Learn More
    $162.40

  • AMC Hydraulic Flat Tappet Camshaft

    Part Number: 44915
    AMC Hydraulic Flat Tappet Camshaft

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 2 - Baja Beast - Strong Upper bottom/top end power.
    INT/EXH - Dur @ .050” Lift: 208°/208° RR: 1.6/1.6 Gross Lift: .448”/.448” LSA: 112° RPM: 1800 to 4250 Redline: 4750
    Learn More
    $162.40

  • AMC Mechanical Flat Tappet Camshaft

    Part Number: 44312
    AMC Mechanical Flat Tappet Camshaft

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 4 - Pro-Street - Exhbits strong mi-range to top end performance
    INT/EXH - Dur @ .050” Lift: 248°/250° RR: 1.6/1.6 Gross Lift: .499”/.512” LSA: 110° RPM: 2000 to 6000 Redline: 7000
    Learn More
    $195.51

  • AMC Mechanical Flat Tappet Camshaft

    Part Number: 44311
    AMC Mechanical Flat Tappet Camshaft

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 3 - Pro-Street - Strong upper bottom to mid-range power.
    INT/EXH - Dur @ .050” Lift: 238°/242° RR: 1.6/1.6 Gross Lift: .480”/.486” LSA: 112° RPM: 1800 to 4500 Redline: 6000
    Learn More
    $195.51

  • AMC Mechanical Flat Tappet Camshaft

    Part Number: 44310
    AMC Mechanical Flat Tappet Camshaft

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 2 - Pro-Street - Delivers versatile height torque,low end and mid-range power.
    INT/EXH - Dur @ .050” Lift: 210°/218° RR: 1.6/1.6 Gross Lift: .448”/.453” LSA: 112° RPM: 1500 to 4000 Redline: 5500
    Learn More
    $195.51

  • AMC Hydraulic Flat Tappet Camshaft

    Part Number: 44245
    AMC Hydraulic Flat Tappet Camshaft

    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 3 - Ultra Performance Compu-Pro - Street/strip cam. Super top end power.
    INT/EXH - Dur @ .050” Lift: 212°/218° RR: 1.6/1.6 Gross Lift: .462”/.475” LSA: 112° RPM: 2000 to 5000 Redline: 5500
    Learn More
    $162.40

  • AMC Hydraulic Flat Tappet Camshaft

    Part Number: 44243
    AMC Hydraulic Flat Tappet Camshaft

    1 Review(s)
    AMC - 199, 232, 234 (4.0L) & 258 (4.2L)
    Performance level 2 - Power Compu-Pro - Perfect combination power/mileage with extended rpms.
    INT/EXH - Dur @ .050” Lift: 194°/204° RR: 1.6/1.6 Gross Lift: .437”/.445” LSA: 112° RPM: 1500 to 4000 Redline: 4500
    Learn More
    $162.40

  • AMC Hydraulic Flat Tappet Camshaft

    Part Number: 45236
    AMC Hydraulic Flat Tappet Camshaft

    AMC - 290, 304, 343, 360 (5.9L) & 390 401
    Performance level 1 - Mileage Compu-Pro - These cams are designed to enhance throttle response and low end torque while delivering fuel efficient motoring. High vacuum, smooth idle and maximum fuel efficiency are characteristic to these profiles. Stock or small cfm carburetor, small diameter tube headers, dual exhaust, and ignition rework are recommended for maximum benefit. Intended for low compression engines operating in the “economy zone.”
    INT/EXH - Dur @ .050” Lift: 192°/196° RR: 1.6/1.6 Gross Lift: .427”/.432” LSA: 112° RPM: Idle to 3500 Redline: 4000
    Learn More
    $195.51

 

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving and mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts work well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 4 camshafts are designed for heavily modified engines. These camshaft have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine or oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion and tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 5 camshafts are designed for fully prepared, high compression, all-out racing engines and chassis. Extensive cylinder head modification, bigger valves, lightweight valve train, titanium valves, maximum flow carburetion or fuel injection, racing gas, alky or nitro, magneto or electronic ignition, performance rod and crank assembly and increased engine clearances are required for maximum benefit.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

Level 4 camshafts are designed for heavily modified engines. They have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine and oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion,tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Items 1 to 12 of 22 total

per page

Page:
  1. 1
  2. 2