Camshafts

Camshafts

View Catalog Pages for Buick by clicking here

Items 1 to 12 of 18 total

per page

Page:
  1. 1
  2. 2
Shop By

Currently Shopping by:

  1. Category: Buick Remove This Item
  2. Price: $200.00 and above Remove This Item
  • Custom Camshaft Buick 196-252 V6 (Evenfire) Mechanical Flat Tappet

    Part Number: 00154M
    Custom Camshaft Buick 196-252 V6 (Evenfire) Mechanical Flat Tappet

    Custom Camshaft Buick 196-252 V6 (Evenfire) Mechanical Flat Tappet
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $251.25

  • Buick Mechanical Flat Tappet Camshaft

    Part Number: 50354
    Buick Mechanical Flat Tappet Camshaft

    Buick - 350
    Performance level 5 - Compu-Pro - Explosive power throughout the power band.
    INT/EXH - Dur @ .050” Lift: 246°/250° RR: 1.55/1.55 Gross Lift: .485”/.498” LSA: 108° RPM: 3000 to 7000 Redline: 7250
    Learn More
    $224.74

  • Buick Mechanical Flat Tappet Camshaft

    Part Number: 50305
    Buick Mechanical Flat Tappet Camshaft

    Buick - 215, 300 & 340
    Performance level 4 - Compu-Pro - Tremendous upper mid to top end torque and horsepower.
    INT/EXH - Dur @ .050” Lift: 256°/262° RR: 1.6/1.6 Gross Lift: .536”/.549” LSA: 108° RPM: 3000 to 6500 Redline: 7500
    Learn More
    $224.74

  • Buick Mechanical Flat Tappet Camshaft

    Part Number: 50304
    Buick Mechanical Flat Tappet Camshaft

    Buick - 215, 300 & 340
    Performance level 3 - Compu-Pro - Strong mid-range and top end power.
    INT/EXH - Dur @ .050” Lift: 246°/250° RR: 1.6/1.6 Gross Lift: .502”/.514” LSA: 108° RPM: 2500 to 6000 Redline: 7000
    Learn More
    $224.74

  • Buick 350 Compu-Pro Solid. Camshaft

    Part Number: 50355
    Buick 350 Compu-Pro Solid. Camshaft

    Buick - 350
    Performance level 5 - Compu-Pro - Superior mid-range and top end torque
    INT/EXH - Dur @ .050” Lift: 256°/262° RR: 1.55/1.55 Gross Lift: .519”/.532” LSA: 108° RPM: 3500 to 7750 Redline: 7750 plus


    Learn More
    $224.75

  • Buick Mechanical Flat Tappet Camshaft

    Part Number: 54311
    Buick Mechanical Flat Tappet Camshaft

    Buick - 196 (3.2L), 231 (3.8L) & 252 (4.1L) Evenfire
    Performance level 4 - Compu-Pro - Hot street/strip profile. Strong mid to top end torque and horsepower.
    INT/EXH - Dur @ .050” Lift: 244°/248° RR: 1.6/1.6 Gross Lift: .501”/.514” LSA: 108° RPM: 2200 to 6000 Redline: 6500
    Learn More
    $214.34

  • Buick Mechanical Flat Tappet Camshaft

    Part Number: 52312
    Buick Mechanical Flat Tappet Camshaft

    Buick - 400, 430 & 455
    Performance level 5 - Compu-Pro - Superior mid-range and top end torque.
    INT/EXH - Dur @ .050” Lift: 258°/262° RR: 1.6/1.6 Gross Lift: .533”/.549” LSA: 108° RPM: 3500 to 7000 Redline: 7000
    Learn More
    $214.34

  • Buick Mechanical Flat Tappet Camshaft

    Part Number: 52310
    Buick Mechanical Flat Tappet Camshaft

    Buick - 400, 430 & 455
    Performance level 4 - Compu-Pro - High torque, all purpose profile.
    INT/EXH - Dur @ .050” Lift: 238°/242° RR: 1.6/1.6 Gross Lift: .482”/.488” LSA: 108° RPM: 2500 to 6000 Redline: 6500
    Learn More
    $214.34

  • Buick Mechanical Flat Tappet Camshaft

    Part Number: 50303
    Buick Mechanical Flat Tappet Camshaft

    Buick - 215, 300 & 340
    Performance level 3 - Compu-Pro - Strong mid to top end torque and horsepower.
    INT/EXH - Dur @ .050” Lift: 238°/242° RR: 1.6/1.6 Gross Lift: .482”/.488” LSA: 108° RPM: 2000 to 5500 Redline: 6000
    Learn More
    $224.74

  • Custom Buick Flat Tappet Camshaft

    Part Number: 00151
    Custom Buick Flat Tappet Camshaft

    Custom Camshaft Buick 215-340 Mechanical or Hydraulic Flat Tappet


    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $238.42

  • Custom Buick Flat Tappet Camshaft

    Part Number: 00152
    Custom Buick Flat Tappet Camshaft

    Custom Camshaft Buick 400-455 Mechanical or Hydraulic Flat Tappet
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $238.42

  • Custom Camshaft Buick 196-252 V6 (Evenfire) Hydraulic Flat Tappet

    Part Number: 00154H
    Custom Camshaft Buick 196-252 V6 (Evenfire) Hydraulic Flat Tappet

    Custom Camshaft Buick 196-252 V6 (Evenfire) Hydraulic Flat Tappet
    Learn More
    • This is a custom item.
    • Please fill out the custom specification request here  before ordering this camshaft.
    • You will receive an email response with our recommended custom design specs.
    • The delivery time is based on your customization requirements..
    $206.12

 

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving and mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts work well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 4 camshafts are designed for heavily modified engines. These camshaft have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine or oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion and tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Level 5 camshafts are designed for fully prepared, high compression, all-out racing engines and chassis. Extensive cylinder head modification, bigger valves, lightweight valve train, titanium valves, maximum flow carburetion or fuel injection, racing gas, alky or nitro, magneto or electronic ignition, performance rod and crank assembly and increased engine clearances are required for maximum benefit.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 1 indicates a good stock replacement camshaft. These profiles are designed to enhance throttle response and low end torque in vans, trucks, passenger cars and mild marine applications while delivering fuel efficient motoring. High vacuum, smooth idle and maximum efficiency are characteristics of these cams. Stock or small cfm carburetor, small diameter tube headers and dual exhaust are recommended for maximum benefit. Intended for stock or near-stock engines and drive trains, 8.5:1 compression, 2.70 to 3.25 ring and pinion, automatic transmission with stock converter or four-speed manual transmission.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 2 profiles are for individuals that require more power and an extended rpm range. Works well with stock or near-stock engines and drive trains in a lightly modified street engine. These camshafts provide excellent low end and mid-range power for spirited street, off road driving or mild marine applications. Modifications that should accompany installation of these cams include small diameter tube headers, low restriction dual exhaust, aftermarket manifold, increased cfm carburetor and reworked or performance ignition. Increased compression (9.5:1) is recommended for maximum output. Aftermarket torque converter with slightly higher stall speed is recommended because stock factory converters do not allow the engine to provide adequate idle speed and off idle performance. These camshafts works well with four-speed manual transmission.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

This camshaft's Performance Level varies by CID group. Please see information specific to your CID group in the more detailed product description below.

Level 3 camshafts are designed for moderately modified engines. Intended for performance hot street/strip and performance marine applications, these profiles have a moderate lope at idle and offer an extended rpm range with emphasis on upper bottom to top end power and a strong mid-range. These higher lift, longer duration camshafts demand close attention to rear end gearing and tire diameter combinations. The secret here is to pick a ring and pinion gear set and tire diameter that keeps the engine in its optimum rpm power range. These profiles perform well with four-speed manual transmissions or automatic transmissions if a high stall torque converter is employed. Headers, dual exhaust, larger than stock carburetor, performance manifold and increased compression (9.5:1 to 10.5:1) are required. Mild porting and larger valves will improve performance.

Level 4 camshafts are designed for heavily modified engines. They have a definite lope at idle and are best suited for dual purpose hot street/drag strip, hot marine and oval track applications. These grinds exhibit strong mid-range to top end torque and horsepower. Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above are required. Cylinder head modifications would be beneficial. Use with standard manual transmission or automatic with high stall torque converter. Again, close attention to proper ring and pinion,tire diameter selection is imperative.

If you are uncertain as to which cam profile best suits your needs, please contact our technical support staff at 619-661-6477.

Items 1 to 12 of 18 total

per page

Page:
  1. 1
  2. 2