For technical support call 619-661-6477

or visit

www.crower.com

STAINLESS STEEL VALVES

Made from the highest grade stainless steel, this

new Crower valve is a must for high horsepower,

high boost and high rpm applications. The exclu-

sive “Pro Flo” head design delivers a signiﬁcant

increase in cylinder head ﬂow ﬁgures, while the

tip area is hardened to RC50, including past the

critical keeper groove area for added strength.

Fully CNC machined and swirl polished to insure

that you will get the best performance valve

available on the market. Choose from standard

and 1mm oversize. Titanium valves also available.

Duration ﬁgures are taken at the lobe.

ENGINEERED COMPONENT KIT

Springs

Retainers

Part

No.

Remarks

84170

87083-16

Titanium retainer intended for race and limited street

68195-16

FOCUS PZEV & ST, 4 CYL RANGER (2003-2007)

Ford Focus ST (2004)

STAGE 1

Street use with emphasis on bottom end and mid range power. Works with stock springs up to factory rev limiter.

RPM Range: Idle to 7000+

STAGE 2 - Forced Induction

Designed speciﬁcally for turbo or supercharger applications. Low duration, high lift proﬁle. Requires Crower spring kit #84170.

RPM Range: Idle to 8000+

STAGE 2 - Ultra Hot Street

Designed for street/strip applications in normally aspirated engines. Requires spring/retainer kit #84170. RPM Range: 1000 to 7800+

STAGE 3 - Drag Race / Radical Street

Drag Race and radical Street/Strip. Requires #84170 spring kit and compatible ECU upgrade for optimum results. Rough idle.

RPM Range: 1100 to 8000+

CUSTOM GRIND

Crower can custom grind cams to your desired specs, also proprietary proﬁles available upon request.

Stock

62551-2

62551T-2

62552-2

62553-2

00079-2

Stock

84170

112°

114°

112°

.358"

.397"

.400"

.390"

.414"

.317"

.347"

.400"

.374"

.393"

202°

211°

220°

228°

236°

256°

260°

270°

276°

284°

189°

205°

220°

228°

252°

257°

270°

268°

276°

Refer to www.crower.com for

camshaft recommendation

Suitable

Component

Kit

Part

Number

Lobe

Sep.

Description

Lobe Lift

Intake

Exhaust

Duration

@ .050"

Intake

Exhaust

Advertised

Duration (.010")

Intake

Exhaust

Spring pressure:

68195-16 Seat: 1.400" @ 66 lbs / Nose: 1.000" @ 161 lbs / Coil bind: 0.860"

(No machine work required).

Note: When ordering valves, be sure to specify one set int and one set exh.

ACCESSORIES

Part

No.

Remarks

Stainless steel valves - 35 mm head dia (8 only int)

Stainless steel valves - 30.5 mm head dia (8 only exh)

Stainless steel valves - 36 mm head dia (8 only int)

Stainless steel valves - 31 mm head dia (8 only exh)

97427I-8

97427E-8

97429I-8

97429E-8

Part numbers no longer listed may be available as custom grinds.

Please contact Crower.

Note: These cams use .006" intake (cold), .008" exhaust valve lash (cold).

Ford/Mazda

2.0L & 2.3L DURATEC - TWIN CAM

MECHANICAL FLAT TAPPET